As the first pod system kit form voopoo drag nano pod, VOOPOO DRAG NANO POD KIT consists of 750mAh built-in battery and the 1.0ml refillable pod with pocket-friendly size and beautiful resin panel. Moreover, the DRAG Nano Pod kit inherits the classic and advanced GENE pod chip which is born for best flavour to bring unbelievable vaping for you. In addition to the brand-new 1.8ohm coil, DRAG Nano is optimized for nic-salts e-juice. Come and get one for you great vaping experience.
freemax vape is exquisitely designed with both carbon fibre and resin finish options. Powered by a built-in 950 mAh battery, the battery section integrates an advanced AS Micro chipset, permitting for TC boost mode and precise temperature control to prevent dry heating. The chipset also features an automatic output matching function. This means that when the 0.7ohm coil is in use, the output will adjust to power mode which can be set to 2.5V, 2.7V or 2.9V. When the 1.2ohm coil is inserted, the output will automatically engage temperature control mode. The battery life is monitored via a side LED light. By pressing the fire button twice, the light will glow in different colours to show, green for higher than 70%, blue for 31-69% and red means 30% or lower. During charging, the LED will blink the colour of the current charge level, red for 0-69%, green for 70-100% and a green light will stay lit once the battery is fully charged. As for the 3ml pod, it is attached to the battery section via a magnetic connection. Replacing the coil on each pod is done via a thread-less cap that needs only a quarter turn to remove the coil. This cap allows for airflow control adjustment as well. And, refilling the pod is effortless due to a bottom cap which will expose a fill slot when removed. With purchase, you will receive a 0.7ohm NS mesh coil which is pre-installed inside the pod and a 1.2ohm NS coil which is said to produce maximum flavour production.
Size: 86.1mm * 37mm * 15.7mm
Material: Zinc Alloy & Resin
Battery: Built-In 950mAh Battery
E-Juice Capacity: 2mL
Output Power: 2.5V 420℉/2.7V 440℉/2.7V 460℉
Coil Resistance: 0.7ohm-3ohm
Charging Specification: 5V 1A
Low Voltage Warning: 3.3V±0.1V
PCBA Temperature Alarm: 80℃
Maximum Output Duration: 10s
Stand-By Current: Less Than 10uA